Connecting A Wireless Security Camera to Wireless Router

It can be troublesome to connect the wireless IP camera to a wireless router, especially if you have not done that before or you simply lack expertise and the experience to do it. After all, not everyone can be completely knowledgeable in networking technologies and terminology. But by following these steps, you should be able to successfully connect a wireless security camera system to a Wireless router on your own:

1. Access the web interface of the IP camera
   
   Some Wireless security cameras system are incapable of PoE, so their default IP address, along with NVRs and other IP cameras is 192.168.1.108, unless noted otherwise by the manufacturer or provider. You may have to change your network configuration to see the web service of the camera or use the IP config tool provided by the security camera provider to change the IP address.
   
   Use an Ethernet cable to connect your camera to your network before plugging the 12v DC adaptor. Wait around a minute to let the camera warm up and power up on its own and let the network access it. Using your browser (i.e. Internet Explorer, Chrome, or Firefox), go to the IP address of the camera.
   
   
2. Configure the address
   
   On the web service, look for the drop-down box with ‘WIRE(DEFAULT)’ and pick ‘wireless’. Click the ‘DEFAULT’ button beside the drop-down box, then click the radio button that says, ‘STATIC’. From there, you can alter the camera’s address, but make sure that it will not cause any problems with another device connected to your network. Likewise, make sure that the default gateway is right and the subnet mask is the same as the rest of the network. Remember that the Wireless address should not be the same as your wired address, so set it differently. Once you are done, remember to save and allow the device to refresh.
   
   
3. Connect to the wireless router
   
   Find Setup, then choose Network, which should lead you to Wireless, and click ENABLE. Click ‘SEARCH SSID’ to find the available networks, or choose ‘ADD SSID’ if your network isn’t broadcasting on an SSID. Double-click your network’s name and input your credentials. Make sure the camera is connected properly by disconnecting the network cables and power from it. Wait 10 seconds before reconnecting the power, and give it two minutes to boot and connect to your newly configured wireless network. From there, try connecting the camera via your web browser using the newly configured wireless IP address.

Blog Source URL: http://www.securitycameradistributor.com/Connecting-A-Wireless-Security-Camera-to-Wireless-Router_b_16.html

Things to Consider When Buying School Security Cameras

Advanced surveillance systems and security cameras have redefined the security monitoring and law enforcement measures. Because of the prevalence of crooked and corrupted elements of the society youngsters are always vulnerable and it is necessary to keep an eye on them and protect them. School administrations have found it highly important to equip their premises with security and surveillance systems. Thus, if you are a concerning authority at the school and you have the responsibility of installing security cameras in school; some important considerations are mentioned here so that you can buy a great deal for the surveillance and protection of the students.

IP/Megapixel: IP/Megapixel security cameras are far better than basic analog ones. They provide you with the feature like digital zoom that will give you high-quality images. These cameras will also provide you more features and functionality than the traditional ones. Additionally, IP cameras store the entire footage on a remote server. In an emergency, your footage will be safe for investigation and other requirements.

Weatherproof/Vandal Resistant: On school premises, cameras have to be everywhere to ensure the best possible surveillance of each and every corner of the school. For that, the cameras have to be weatherproof and vandal resistant. Kids are mischievous and they often target surveillance cameras to do headstrong activities. You have to make sure that your security cameras are able to withstand such activities.

Infrared Capability: Security cameras should be able to work properly in dark atmosphere or an atmosphere that is lacking proper natural or artificial light such as corridors and stairs. Such areas generally have low light than the other areas like classrooms or labs. A security camera with infrared capability can capture images and videos in low light and that gives you the control over so many potential situations.

Remote Monitoring: Remote monitoring is a great way to oversee things from a distance. You can operate and focus the camera wherever you want and also anticipate contingencies and gain control over the situation. With this special feature, you will have access to each camera and you can control it anytime and in any way possible.

Wide Field of View: Cameras that feature 180-degree or even 360-degree fields of view consist of several lenses and can do the job of four analog cameras. It enables a panoramic view of the area and nothing will be hidden from its sight.

Blog Source URL: http://www.securitycameradistributor.com/Things-to-Consider-When-Buying-School-Security-Cameras_b_5.html